標準號：BS EN ISO 527-4-1997
中文標準名稱：塑料.抗拉性能測定.第4部分:正交同性和正交異性纖維試驗條件.增強塑料復合材料
英文標準名稱：Plastics - Determination of tensile properties - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
標準類型：G31
發布日期：1997/7/15 12:00:00
實施日期：1997/7/15 12:00:00
中國標準分類號：G31
國際標準分類號：83.120
適用范圍：1 This part of ISO 527 specifies the test conditions for the determination of the tensile properties of isotropic and orthotropic fibre-reinforced plastic composites, based upon the general principles given in part 1. Unidirectionally reinforced materials are covered by part 5. 2 See ISO 527-1, subclause 1.2. 3 The test method is suitable for use with the following materials: — fibre-reinforced thermosetting and thermoplastic composites incorporating non-unidirectional reinforcements such as mats, woven fabrics, woven rovings, chopped strands, combinations of such reinforcements, hybrids, ravings, short or milled fibres or preimpregnated materials (prepregs) (for directly injection-moulded specimens, see specimen 1A in ISO 527-2:1993); — combinations of the above with unidirectional reinforcements and multidirectional reinforced materials constructed from unidirectional layers, provided such laminates are symmetrical (for materials with completely, or mainly, unidirectional reinforcements, see ISO 527-5); — finished products made from these materials. The reinforcement fibres covered include glass fibres, carbon fibres, aramid fibres and other similar fibres. 4 The method is performed using specimens machined from a test panel made in accordance with ISO 1268 or by equivalent methods, or from finished and semi-finished products with suitable flat areas. 5 See ISO 527-1, subclause 1.5.