標準號：ANSI/ASME PTC6S-1988
中文標準名稱：蒸汽輪機例行性能試驗用程序
英文標準名稱：Procedures for Routine Performance Tests of Steam Turbines
標準類型：K54
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：K54
國際標準分類號：27.040
適用范圍：The test procedures of this Report are intended for periodic turbine tests and do not supplant the Code (PTC 6) as the basic procedure for turbine acceptance tests. The Code is used for the accurate testing of steam turbines to obtain performance level with minimum uncertainty. Sections 3 through 5 of this Report present general recommendations for instrumentation and test planning. These recommendations are based on current industry practice for the periodic determination of turbine-cycle performance. Section 6 discusses interpretation of test results and shows typical plots of test data for analysis of turbine performance. Sections 7 through 12 present test procedures for selected types of turbine cycles. Each of these procedures contains specific recommendations for instrumentation and method for testing a selected turbine type.