標準號:BS EN 14829-2007
中文標準名稱:家用燃氣標定熱負荷不超過6kW的無煙道單獨采暖爐
英文標準名稱:Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW
標準類型:Q83
發布日期:2007/9/28 12:00:00
實施日期:2007/9/28 12:00:00
中國標準分類號:Q83
國際標準分類號:97.100.20
引用標準:EN 88-1;EN 125;EN 126;EN 161;EN 257;EN 298;EN 437-2003;EN 751-1;EN 751-2;EN 1057-2006;CR 1404;EN 60068-2-1975;EN 60335-1-2002;EN 60335-2-102;EN 60529;EN 60730-2-9;EN ISO 228-1-2003;EN ISO 3166-1;EN ISO 7-1-1994
適用范圍:This document specifies, for the purpose of type examination, the requirements and test methods forconstruction, safety, marking and rational use of energy of 2nd and 3rd family gas-fired domesticflueless space heating appliances having a nominal input not exceeding 6 kW (based on net calorificvalue).It covers the following Type AAS fixed flueless heaters:NOTE These are type A appliances fitted with an atmosphere sensing device, with or without a fan.a) heaters with or without a catalytic converter;b) Category 1 appliances burning gases of the second family;c) Category 2 appliances burning gases of the second and third families.It does not coveri. Mobile heaters.ii. Category 1 appliances burning gases of the third family.iii. Portable flueless heaters.iv. Diffusive catalytic combustion heaters.There are no specific thermal efficiency requirements appropriate to these types of appliance as:? All the heat produced by the combustion process is released into the space to be heated.? The requirements with regard to the combustion performance, which is a safety matter, ensure theeffective burning of the fuel gas.This standard is only applicable to appliances which are to be type tested. Matters related to qualityassurance systems, tests during production and to certificates of conformity of auxiliary devices arenot dealt with by this standard.
相關標準
《ISO18219:2015(E)》皮革中氯化烴的測定.色譜法測試短鏈氯化石蠟(SCCP)
《ISO17070:2015(E)》皮革-化學試驗-四氯苯酚,三氯苯酚,二氯苯酚,一氯苯酚異構體和五氯苯酚含量的測定
《ISO17234-2:2011》皮革—測定染色皮革中某些偶氮著色劑的化學試驗—第2部分:對4-氨基偶氮苯的檢測
《GB/T230.1-2018》金屬材料 洛氏硬度試驗第1部分:試驗方法
《GB/T10808-2006》高聚物多孔彈性材料 撕裂強度的測定
《GB/T230.1-2018》金屬材料 洛氏硬度試驗 第1部分:試驗方法(A、B、C、D、E、F、G、H、K、N、T標尺)
《CCGF503.5-2015》旋耕機
《CCGF503.5-2015》旋耕機
《CCGF503.5-2015》旋耕機
《JB/T9798.1-2011》手扶拖拉機配套旋耕機 第1部分:技術條件
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;