FCC針對U-NII-35G設備認證測試再做調整
作者：百檢網 時間：2021-11-22 來源：互聯(lián)網
2016年3月2日，F(xiàn)CC頒布關于(U-NII)5G設備的ET Docket No. 13-49技術文件的備忘錄FCC-16-24A1。該備忘錄不會在發(fā)布后30天后生效，具體生效時間由FCC發(fā)布指導文件后正式執(zhí)行。該備忘錄對Part 15E的內容進行調整如下：
?
15.407 General technical requirements.
?
(1) For the band 5.15 – 5.25 GHz: (iv) For client devices in the 5.15-5.25 GHz band, the maximum conducted output power over the frequency band of operation shall not exceed 250 mW provided the maximum antenna gain does not exceed 6 dBi. In addition, the maximum power spectral density shall not exceed 11 dBm in any 1 megahertz band. If transmitting antennas of directional gain greater than 6 dBi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. ? ? ? ??
?
(4) For transmitters operating in the 5.725-5.85 GHz band:
?
(i) All emissions shall be limited to a level of -27 dBm/MHz at 75 MHz or more above or below the band edge increasing linearly to 10 dBm/MHz at 25 MHz above or below the band edge, and from 25 MHz above or below the band edge increasing linearly to a level of 15.6 dBm/MHz at 5 MHz above or below the band edge, and from 5 MHz above or below the band edge increasing linearly to a level of 27 dBm/MHz at the band edge.
?
(ii) Devices certified before March 2, 2017 with antenna gain greater than 10 dBi may demonstrate compliance with the emission limits in Section 15.247(d), but manufacturing, marketing and importing of devices certified under this alternative must cease by March 2, 2018. Devices certified before March 2, 2018 with antenna gain of 10 dBi or less may demonstrate compliance with the emission limits in Section 15.247(d), but manufacturing, marketing and importing of devices certified under this alternative must cease before March 2, 2020.