標準號：BS ISO 5414-2-2002
中文標準名稱：扁方筒形柄刀具用的帶卡箍螺釘?shù)牡毒呖ūP(立銑刀刀具卡盤架).第2部分:夾頭的連接尺寸和命名
英文標準名稱：Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Connecting dimensions of chucks and designation
標準類型：J51
發布日期：2002/11/19 12:00:00
實施日期：2002/11/19 12:00:00
中國標準分類號：J51
國際標準分類號：25.060.20
適用范圍：This part of ISO 5414 specifies the dimensions of tool chucks (end mill holders) with clamp screws for tools with flatted cylindrical shanks in accordance with ISO 3338-2. It also specifies the designations of these chucks. Two types of connection are defined: — chucks with 7/24 taper shanks in accordance with ISO 297 for manual changers and with ISO 7388-1 for automatic changers, for tool shanks with either single flat or a double flat for manual and automatic changers; NOTE 1 This part of ISO 5414 specifies the dimensions of tool chucks with 7/24 taper shanks No. 30 for automatic changers although these are not standardized. — chucks with Morse taper shanks in accordance with ISO 296 and ISO 5413 for tool shanks with a single flat only. NOTE 2 The dimensions of the driving system of the tool shanks are dealt with in ISO 5414-1.