標準號：ISO 18278-1-2004
中文標準名稱：阻焊.可焊性.第1部分:金屬材料的電阻點焊、縫焊和凸焊的可焊性評定
英文標準名稱：Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials
標準類型：J33
發(fā)布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J33
國際標準分類號：25.160.10
適用范圍：This document recommends procedures for determining the generic weldability for resistance spot, seam and projection welding of metallic materials. This procedure is applicable for the assessment of the weldability of uncoated/coated steels, stainless steels and non-ferrous alloys such as aluminium, titanium, magnesium and nickel and their alloys of single thickness lower than or equal to 5 mm. The weldability of metallic materials in resistance welding is defined in terms of: — the ability to make the weld in the first place; — the ability to continue making welds; — the ability of the weld to withstand the imposed service stresses. The procedures recommended in this standard can be used to: — compare the weldability of different metallic materials; — compare the welding response of particular welding equipment and allow comparisons between different equipment and determine the influence of the static/dynamic properties of different welding equipment; — determine the weldability of a material when any welding configuration is changed e.g. electrode material and/or shape, water cooling requirements etc.; — investigate the effect of welding parameters such as welding current, weld time, electrode force or complex welding schedules including pulse welding, current stepping etc. on weldability.