標準號：ISO 15876-3-2003
中文標準名稱：冷熱水裝置用塑料管道系統.聚丁烯(PB).第3部分:配件
英文標準名稱：Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings
標準類型：Q81
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：Q81
國際標準分類號：23.040.20;23.040.45
適用范圍：This Part of EN ISO 15876: specifies the characteristics of fittings for polybutylene (PB) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems under design pressures and temperatures according to the class of application (see Table 1 of EN ISO 15876-1:2003). This standard covers a range of service conditions (application classes) and design pressure classes. For values of TD, Tmax and Tmal in excess of those in Table 1 of Part 1, this standard does not apply. NOTE It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. It also specifies the parameters for the test methods referred to in this standard. In conjunction with the other parts of EN ISO 15876 (see Foreword) it is applicable to fittings made from PB and to fittings made from other materials which are intended to be fitted to pipes conforming to EN ISO 15876-2:2003 for hot and cold water installations and whereby the joints conform to the requirements of EN ISO 15876-5. It is also applicable to fittings made from alternative materials which when fitted to pipes conforming to Part 2, conform to the requirements of Part 5 of EN ISO 15876:2003. This standard is applicable to fittings of the following types: — socket fusion fittings — electrofusion fittings — mechanical fittings — fittings with incorporated inserts