標準號：IEC 60215-2016
中文標準名稱：無線電發射設備的安全要求.一般要求和術語
英文標準名稱：Safety requirements for radio transmitting equipment - General requirements and terminology
標準類型：M74
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：M74
國際標準分類號：33.060.20
引用標準：IEC 60068-2-1-2007;IEC 60112-2003;IEC 60244-6-1976;IEC 60529-1989;IEC 60695-1-10-2009;IEC 60695-1-11-2014;IEC 60825-12-2005;IEC 62232-2011;IEC 62311-2007;ISO 1999-2013;2011/65/EU-2011
適用范圍：This International Standard applies to radio transmitting equipment, operating under the responsibility of SKILLED persons. It also applies to auxiliary equipment and ancillary apparatus, including combining units and matching networks and cooling systems where these form an integral part of the transmitter system. The requirements of IEC 60215 may also be used to meet safety requirements for cognate equipment. Examples of equipment that could be within the scope of this International Standard are shown in Table 1. Table 1 - Examples of equipment Generic product type Specific example of generic type RF amplifiers High power RF amplifiers used for industrial, medical or scientific applications High-voltage power supplies (HVPS) DC HVPS based on PSM technology or any cognate technology Table 1 is not intended to be comprehensive, and equipment that is not listed is not necessarily excluded. When the equipment is to be manufactured and/or installed in territories that have safety standards covering the scope of this International Standard that are more stringent, then those standards apply. Antenna systems, associated feeder lines and matching networks, not forming an integral part of the transmitter, are excluded. This International Standard does not apply to transmitters of safety-insulated construction using DOUBLE INSULATION or REINFORCED INSULATION and without provision for protective earthing. This type of equipment is designated CLASS II EQUIPMENT and is usually marked with a symbol as shown in 3.2.2 b). This International Standard does not apply to battery powered transmitters or to radio base stations and fixed terminal stations for wireless telecommunication, as this equipment is covered by other standards.