標準號：BS ISO 14853-2005
中文標準名稱：塑料.含水系統中塑料材料的*大厭氧生物降解能力的測定.生物氣產生的測量方法
英文標準名稱：Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
標準類型：G31
發布日期：2005/2/17 12:00:00
實施日期：2005/2/17 12:00:00
中國標準分類號：G31
國際標準分類號：13.060.70;83.080.01
適用范圍：This International Standard specifies a method for the determination of the ultimate anaerobic biodegradability of plastics by anaerobic microorganisms. The conditions described in this International Standard do not necessarily correspond to the optimum conditions for the maximum degree of biodegradation to occur. The test calls for exposure of the test material to sludge for a period of up to 60 days, which is longer than the normal sludge retention time (25 to 30 days) in anaerobic digesters, though digesters at industrial sites can have much longer retention times. The method applies to the following materials: — Natural and/or synthetic polymers, copolymers or mixtures thereof; — Plastic materials which contain additives such as plasticizers, colorants or other compounds; — Water-soluble polymers; — Materials which, under the test conditions, do not inhibit the microorganisms present in the inoculum. Inhibitory effects can be determined using an inhibition control or by another appropriate method (see e.g. ISO 13641). If the test material is inhibitory to the inoculum, a lower test concentration, another inoculum or a pre-exposed inoculum can be used.