標準號：DIN SPEC 1145-2010
中文標準名稱：道路和機場表面特征.第5部分:帶縱向控制滑動裝置用公路表面的防滑測定用程序(LFCRDK):ROAR(道路分析器和Norsemeter記錄器)
英文標準名稱：Road and airfield surface characteristics - Part 5: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK): ROAR (Road Analyser and Recorder of Norsemeter); German version CEN/TS 15901
標準類型：P68
發(fā)布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：P68
國際標準分類號：93.080.20;93.120
引用標準：EN ISO 13473-1;ISO 13473-2
適用范圍：This Technical Specification describes a method for determining the skid resistance of a surface by measurement of the longitudinal friction coefficient LFCN. The method provides a measure of the wet skid resistance properties of a bound surface by measurement of the longitudinal friction coefficient using a continuous reading braked wheel fixed-slip device. The test tyre is dragged over a pre-wetted pavement under controlled speed conditions while the test tyre is parallel to the direction of motion and perpendicular to the pavement. This Technical Specification covers the operation of the Road Analyser and Recorder of Norsemeter (ROAR). The fixed slip ratio is 20 %. A machine conforming to the general characteristics of the ROAR and the specific provisions of this Technical Specification may also be used for the tests. In addition to friction measurements, to determine the macro texture of the pavement surface a laser system is used. This system is placed in front of the towing vehicle in order to measure the macro texture (mean profile depth - MPD) on dry pavements and on the same path as the skid resistance measurement is done. The standard for this measurement and the device is described in EN ISO 13473-1. The skid resistance of a pavement is determined by friction measurements and measurements of pavement texture. The skid resistance may be reported either as friction measurement or as a combination of friction and texture measurements.