標準號：BS EN 14064-2-2010
中文標準名稱：建筑物隔熱產品.現場成型松散填充的礦物棉(MW)產品.第2部分:安裝產品用規范
英文標準名稱：Thermal insulation products for buildings.In-situ formed loose-fill mineral wool (MW) products. Part 2: Specification for the installed products
標準類型：Q25
發布日期：2010/8/31 12:00:00
實施日期：2010/8/31 12:00:00
中國標準分類號：Q25
國際標準分類號：91.100.60
適用范圍：This European Standard specifies the requirements for blown loose-fill mineral wool products installed in lofts,masonry cavity walls and frame constructions.This European standard is a specification for the installed insulation products.This European standard describes, when taken together with Part 1 of EN 14064, the product characteristicsthat are linked to the essential requirements of the EU Construction Products Directive. It also specifies thechecks and tests to be used for the declarations made by the installer of the product and the rules for theevaluation of conformity.This standard does not specify the required level of a given property to be achieved by a product to demonstratefitness for purpose in a particular application. The levels required for a given application are to be found inregulations or non-conflicting standards. For example, see the note in the scope of Part 1 of EN 14064 regardingthe possibility of special water penetration tests in different Member States.Products with a declared thermal conductivity at 10 °C greater than 0,060 W/(m·K) are not covered by thisstandard.This European Standard does not cover factory made mineral wool products in the form of mats, batts, rolls orboards.This standard does not cover products intended for airborne sound insulation and for acoustic absorptionapplications.