標準號：BS EN 416-1-2009
中文標準名稱：單燃爐燃氣架空輻射管加熱器.第1部分:安全
英文標準名稱：Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety
標準類型：Q83
發(fā)布日期：2009/4/30 12:00:00
實施日期：2009/4/30 12:00:00
中國標準分類號：Q83
國際標準分類號：91.140.40
引用標準：EN 88-1-2007;EN 126-2004;EN 161-2007;EN 257-1992;EN 298-2003;EN 437-2003;EN 10226-1-2004;EN 10226-2-2005;EN 13410;EN 60335-1-2002;EN 60335-2-102-2006;EN 60529-1992;EN 60584-1-1995;EN 60584-2-1993;EN ISO 228-1-2003;EN ISO 3166-1-2006;EN ISO 6976-2005;ISO 2
適用范圍：This European Standard specifies the requirements and test methods for the construction, safety,classification and marking of non-domestic gas fired overhead radiant tube heaters incorporating asingle burner system under the control of an automatic burner control system, referred to in the bodyof the text as 'appliances'.This standard is applicable to Type A2, A3, B12, B13, B22, B23, B42, B43, B52, B53, C12, C13, C32 and C33appliances intended for use in other than domestic dwellings, in which the supply of combustion airand/or the evacuation of the products of combustion is achieved by mechanical means locatedupstream of the draught diverter, if provided.This standard is not applicable to:a) appliances designed for use in domestic dwelling;b) outdoor appliances;c) appliances of heat input in excess of 120 kW (based on the net calorific value of theappropriate reference test gas);d) appliances having fully pre-mixed gas and air burners in which:1) either the gas and all the combustion air are brought together just before the level of thecombustion zone; or2) the pre-mixing of the gas and all combustion air is carried out in a part of the burnerupstream of the combustion zone;e) appliances that are designed for continuous condensation within the flue system undernormal operating conditions;f) appliances having combustion products evacuation ducts that are non-metallic.This standard is applicable to appliances which are intended to be type tested. It also includesrequirements concerning the evaluation of conformity, including factory production control, but theserequirements only apply to POCEDs and their associated terminals.NOTE Requirements for appliances which are not intended to be type tested would need to be subject tofurther consideration.Requirements concerning the rational use of energy have not been included in this EuropeanStandard.