標準號：ISO 4960-2007
中文標準名稱：碳含量大于0.25%的冷軋?zhí)妓劁搸?br/>英文標準名稱：Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %
標準類型：H46
發布日期：2007/12/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：H46
國際標準分類號：77.140.50
適用范圍：This International Standard applies to cold-reduced carbon steel strip with a mass fraction of carbonover 0,25 % made from the steels specified in Table 1. It is commonly produced in thicknesses of 6 mm andunder, and in widths up to 600 mm exclusive, in coils and cut lengths. The strip is ordered in the as-deliveredcondition, as specified in 6.1 or Clause 5, and is predominantly used for springs, but also for other highlystressed parts of many different types. Steel designations CS55 to CS95 may be supplied in the quenchedand tempered condition.This International Standard does not apply to alloy steels or stainless steels.Cold-reduced carbon steel strip is furnished in the following types:full hard, where a very stiff, springy product is produced to obtain full hardness after the final rolling (it isintended for flat work not requiring the ability to withstand cold forming);annealed, which is intended for applications requiring moderate cold forming;quenched and tempered, which is intended generally for the production of steel springs where theappropriate combination of strength, hardness, toughness and ductility can be achieved;intermediate hardness, which is intended for applications where cold forming is slight or where amoderately stiff, springy product is needed.Cold-reduced carbon steel strip is characterized by close dimensional tolerances and good surfacefinish and, in the cold-rolled and quenched and tempered condition, it is possible to attain high values forhardness and tensile strength.