標準號：BS EN 15274-2007
中文標準名稱：結構組件用一般用途粘合劑.試驗方法和要求
英文標準名稱：General purpose adhesives for structural assembly - Requirements and test methods
標準類型：Q27;G39
發布日期：2007/11/30 12:00:00
實施日期：2007/11/30 12:00:00
中國標準分類號：Q27;G39
國際標準分類號：83.180
引用標準：EN 923-2005;EN 1067;EN 1242;EN 1465;EN 1504-8;EN 1877-1;EN 1877-2;EN 12092;EN 13999-1;EN 13999-2;EN 13999-3;EN 13999-4;EN 14022;EN 15336;EN ISO 75-3;EN ISO 527-2;EN ISO 527-3;EN ISO 9142;EN ISO 9664;EN ISO 11339;EN ISO 11909;EN ISO 14896;EN ISO 15605
適用范圍：This European Standard specifies requirements for adhesives intended for use in the creation and generalassembly of load-bearing, structural elements used in civil engineering works and the construction of buildings.Other than the exceptions stated, it embraces all combinations of bonded materials, used to create or repairload-bearing elements.It covers individual adhesives and special purpose kits comprising various combinations of adhesive typesand components.It includes test methods and methods of assessment.The performance requirements in this standard may not be applicable to highly specialised applications inextreme environmental conditions, e.g. cryogenic use, nor do they cover specialised circumstances such asaccidental impact, e.g. due to traffic or ice, or earthquake loading where specific performance requirementswill apply.The intended use is for internal and external construction elements and those cladding and covering elements(excluding ceramic tiles) specifically required, by regulatory authorities, to provide protection from fire inidentified building zones, including escape routes.It does not cover:? Prefabricated, bonded structural components.? Concrete bonded either to itself or steel or a material based on carbon fibre.? Wood, when bonded to itself to form a timber based, laminated beam [of the type known as a ‘Glulam’beam] intended for use as a major structural, load bearing element.? Thermoplastics [e.g. polyethylene, polypropylene, polyamide and fluorinated polymers in general] unlessthey have been specifically prepared [usually through a specialised oxidative process] for bondedassembly on site.? Co-axial metallic assemblies comprising fasteners- threaded and otherwise, pipes and tubes.? Glass assemblies in structural glazing applications made using silicone adhesives.? Those structural elements that are permanently immersed in water.