標準號：DIN EN ISO 6145-10-2008
中文標準名稱：氣體分析.用動態容積法制備校準氣體混合物.第10部分:滲透法
英文標準名稱：Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002); English version of DIN EN ISO 6145-10:2008-11
標準類型：G86
發布日期：2008/11/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G86
國際標準分類號：71.040.40
引用標準：ISO 6145-1
適用范圍：This part of ISO 6145 specifies a dynamic method using permeation membranes for the preparation of calibrationgas mixtures containing component mole fractions ranging from 10~ and 106. A relative expanded uncertainty of2,5 % of the component mole fraction can be achieved using this method In the mole fraction range considered, itis difficult to maintain some gas mixtures, for example in cylinders, in a stable state It is therefore desirable toprepare the calibration gas immediately before use, and to transfer it by the shortest possible path to the placewhere it is to be used. This technique has been successfully applied in generating low content calibration gasmixtures of, for example, sulfur dioxide (SO2), nitrogen dioxide (NO2) and benzene (C6H6) in air.If the carrier gas flow is measured as a gas mass-flow, the preparation of calibration gas mixtures using permeationtubes is a dynamic-gravimetric method which gives contents in mole fractions.