標準號：DIN EN ISO 21003-5-2008
中文標準名稱：建筑物內冷熱水裝置用多層管道系統.第5部分:系統的適用性
英文標準名稱：Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008); English version of DIN EN ISO 21003-5:2008-11
標準類型：Q81;P40
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：Q81;P40
國際標準分類號：91.140.60
引用標準：ISO 1167-1;ISO 1167-2;ISO 1167-3;ISO 1167-4;ISO 13760;ISO 15874-5;ISO 15875-5;ISO 15876-5;ISO 15877-5;ISO 17456;ISO 21003-1-2008;ISO 21003-2-2008;ISO 21003-3;ISO 22391-5;EN 712;EN 713;EN 12293;EN 12294;EN 12295
適用范圍：This part of ISO 21003 specifies the characteristics for the fitness for purpose of multilayer piping systemsintended to be used for hot and cold water installations inside buildings for the conveyance of water --whether or not the water is intended for human consumption (domestic systems) or for heating systems --under specified design pressures and temperatures appropriate to the class of application (see Table 1 ofISO 21003:2008).It also specifies the test parameters for the test methods referred to in this part of ISO 21003.ISO 21003 is a reference product standard. It is applicable to multilayer pipes, fittings, their joints, and also tojoints with components made of other plastics and non-plastics materials intended to be used for hot and coldwater installations. This part of ISO 21003 is intended for use only in conjunction with all the other parts ofISO 21003.ISO 21003 covers a range of service conditions (application classes) and design pressures. It is not applicablefor values of design temperature, TD, maximum design temperature,/'max, and malfunction temperature, TmaI,in excess of those in Table 1 of ISO 21003-1:2008.NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects,taking into account their particular requirements and any relevant national regulations and installation practices or codes.The polymeric materials used for the stress-designed layers are the following: polybutylene (PB), polyethyleneof raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) andchlorinated poly(vinyl chloride) (PVC-C).The PE-X used shall be fully crosslinked and shall comply with the requirements of the relevant referenceproduct standard (ISO 15875).NOTE 2 For the purposes of this ISO 21003, crosslinked polyethylene (PE-X) as well as adhesives are considered asthermoplastic materials.