標準號：SAE AMS 5598E-2007
中文標準名稱：自耗電*或真空感應熔化溶解熱處理、沉淀可硬化的72Ni 15.5Cr 0.95(CB+Ta) 2.5Ti 0.70AL 7.0Fe耐熱和耐腐蝕鎳合金薄板材、帶材和板材
英文標準名稱：Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode, Remelted or Vacuum Induction Melted, Solution Heat Treated, Precipitation-Hardenable UNS N07750
標準類型：H62
發布日期：2007/7/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：H62
國際標準分類號：49.025.99
引用標準：ASTM A 480/A 480M-2006;ASTM E 8-2004;ASTM E 18-2007;ASTM E 112-1996;ASTM E 290-1997;ASTM E 354-1993;SAE AMS 2262;SAE AMS 2269F-2006;SAE AMS 2371G-2003;SAE AMS 2807-1991;SAE AS 4194-1991
適用范圍：This specification covers a corrosion and heat resistant nickel alloy in the form of sheet, strip, and plate procured in inch/pound units. These products have been used typically for parts requiring high strength up to 1500 °F (816 °C) and oxidation resistance up to 1800 °F (982 mdC) and for bellows and flat springs requiring optimum resistance to relaxation up to 1000 °F (538 °C) with moderate or relatively low stresses, particularly where welding is involved, but usage is not limited to such applications. Parts may be formed, welded if required, and then heat treated to improve strength at elevated temperatures.