標準號：ISO 15181-3-2007
中文標準名稱：涂料和清漆.防蟲涂料中殺蟲劑釋放速率的測定.第3部分:通過測定萃取物中乙烯硫脲濃度計算乙烯基雙二硫代氨基甲酸鋅(代森鋅)的釋放率
英文標準名稱：Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract
標準類型：G51
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G51
國際標準分類號：87.040
適用范圍：This part of ISO 15181 specifies the apparatus and analytical method for determining the amount of zineb thathas been released from an antifouling paint into artificial seawater in accordance with the procedure given inISO 15181-1.Zineb is released from antifouling paints in the form of ionic ethylene-bis(dithiocarbamate) which is unstable inthe marine environment. This part of ISO 15181 describes a method for converting the released species into astable degradation product, ethylenethiourea, and determining its concentration in the treated artificialseawater samples, and gives the final calculation for the release rate of zineb under the specified laboratoryconditions.This part of ISO 15181 is designed to generally allow the concurrent determination of zineb and other biocidesthat can be released by a given antifouling paint (for example, copper) through the analysis of separatesub-samples of an artificial seawater extract generated in accordance with the procedure given inISO 15181-1.When used in conjunction with ISO 15181-1, the practical limits on the quantitative measurement of releaserates by this method are from 2,9 μg?cm–2?d–1 to 500 μg?cm–2?d–1. The quantitative measurement of releaserates below this range will require the use of an analytical method with a lower limit of quantitation forethylenethiourea in artificial seawater than the limit specified in 5.1.