標準號：ISO 12128-2001
中文標準名稱：滑動軸承 潤滑油孔、油槽和油穴 尺寸、類型、標記及其應用
英文標準名稱：Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes
標準類型：J12
發(fā)布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J12
國際標準分類號：21.100.10;21.260
適用范圍：This International Standard specifies dimensions for lubrication holes, grooves and pockets for bearing bushes. These dimensions can be entered, e.g. on drawings, using the designation examples. Their use depends in particular on the specific operating conditions. In addition, it enables the user to assign the different types of lubricant feed and distribution to plain bearing bushes made of copper alloys, thermosetting plastics, thermoplastics or of artificial carbon. NOTE Different types of lubricant feed and distribution for plain bearing bushes made of sintered metals have not been specified due to the fact that these bushes are soaked with lubricant. Plain bearing bushes made of artificial carbon are not lubricated with oil or grease.