標準號：SAE J 1058-1999
中文標準名稱：標準鋼片厚度和公差
英文標準名稱：Standard Sheet Steel Thickness and Tolerances
標準類型：T05
發布日期：1999/12/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：T05
國際標準分類號：77.140.50;43.040.01
引用標準：ANSI B 32.3;ANSI Z 1.1;ASTM A 463-1988;ASTM A 525-1991;ASTM A 525-1993;ASTM A 568M-1988;ASTM A 591-1977;ASTM A 635-1988;ASTM A 653;ASTM A 792M-1993;ASTM A 879-1996;ASTM A 917-1996;ASTM A 924;ISO 3574-1999;SAE J 1562-1999;SAE J 2329-1997;SAE J 2340-1999
適用范圍：This SAE Recommended Practice provides an orderly series for designating the thickness of uncoated and coated hot-rolled and cold-rolled sheet and strip. This document also provides methods for specifying thickness tolerances. Requirements of industry permit leeway in the choice of thickness in some instances, but it is recognized that for many applications, particularly the tonnage requirements of the mass production industries, thickness is normally determined by critical engineering design or manufacturing considerations. However, for general applications or where requirements permit some latitude in the selection of thickness, the preferred thickness given in Table 1 will facilitate interchangeability of different metals in design, reduce inventory, and increase the availability in warehouse stocks of thicknesses commonly required for general applications. All of the thicknesses listed are not necessarily produced in all metals and grades. Producers or distributors must be consulted to determine availability of a particular thickness for a given metal product.