標準號：BS EN 10160-1999
中文標準名稱：厚度等于或大于6mm的平鋼板制品的超聲波檢驗(反射法)
英文標準名稱：Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
標準類型：H46
發布日期：1999/11/15 12:00:00
實施日期：1999/11/15 12:00:00
中國標準分類號：H46
國際標準分類號：77.040.20;77.140.50
適用范圍：This European Standard describes a method for the ultrasonic testing of uncoated flat steel product for internal discontinuities. It is applicable to flat product in nominal thickness range of 6 mm to 200 mm of non-alloyed or alloyed steel, excluding austenitic or austenoferritic steels. However, this standard may be applied to the latter types of steels provided that the difference between the amplitude of the noise signal and that of the echo detection threshold is sufficient for the limit fixed. This standard also defines four quality classes for the flat product body (classes S0, S1, S2 and S3) and 5 classes (E0, E1, E2, E3, E4) for the edges in accordance with the criteria specified in clause 9. Other methods of testing (e.g. by transmission) or other test equipment may be used at the manufacturer's discretion provided that they give identical results to those obtained under the conditions of this standard. In the event of a dispute, only the method defined in this standard shall prevail. Testing of flat product of thickness less than 6 mm may be the subject of special agreements between the parties concerned. The inspection is normally carried out in the place of production or on the premises of the supplier. If specified on the order, the inspection may take place in the presence of the purchaser or his representative