標準號：BS EN 1612-1-1997+A1-2008
中文標準名稱：塑料和橡膠設備.反應成型設備.第1部分:計量和混合裝置的安全性要求
英文標準名稱：Plastics and rubber machines - Reaction moulding machines - Part 1.Safety requirements for metering and mixing units
標準類型：G95
發布日期：1997/12/15 12:00:00
實施日期：1997/12/15 12:00:00
中國標準分類號：G95
國際標準分類號：83.200
引用標準：EN 563;EN 418-1992;EN 954-1;EN 1005;EN 60204-1-1992;EN ISO 12100-1;EN ISO 12100-2-2003
適用范圍：This standard specifies the health and safety requirements for the design of metering and mixing units for reaction moulding machines. The significant and specific hazards are listed in clause 4 and are dealt with in this standard. This standard does not cover completely the hazards arising from the use of highly flammable additives, for example, pentane used as a blowing agent (see 4.7), because these hazards depend to a large extent on the additives and processes used.This standard does not cover the hazards arising from the assembly of separate units not supplied at the same time by the same manufacturer.This standard does not cover the hazards arising from the movement of powered mixing heads; for these, see EN 1612-2.This standard applies to metering and mixing units manufactured after the date of publication of this standard.