標準號：BS EN ISO 4894-1-1999
中文標準名稱：塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和擠塑材料.名稱與符號系統和規范基礎
英文標準名稱：Plastics - Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials - Designation system and basis for specifications
標準類型：G31
發布日期：1997/10/15 12:00:00
實施日期：1997/10/15 12:00:00
中國標準分類號：G31
國際標準分類號：83.080.20
適用范圍：1 This part of ISO 4894 establishes a system of designation for styrene/acrylonitrile thermoplastic material, which may be used as the basis for specifications. 2 The types of styrene/acrylonitrile plastic are differentiated from each other by a classification system based on appropriate levels of the designatory properties a) Vicat softening temperature b) melt flow rate and on information about basic polymer parameters, intended application and/or method of processing, important properties, additives, colourants, fillers and reinforcing materials. 3 This part of ISO 4894 is applicable to all copolymers of styrene and/or substituted styrene having between 10 % (m/m) and 50 % (m/m) acrylonitrile. It applies to materials ready for normal use and to materials unmodified or modified by colourants, additives, fillers, etc. 4 It is not intended to imply that materials having the same designation give necessarily the same performance. This part of ISO 4894 does not provide engineering data, performance data or data on processing conditions which may be required to specify a material for a particular application and/or method of processing. If such additional properties are required, they shall be determined in accordance with the test methods specified in part 2 of this International Standard, if suitable. 5 In order to specify a thermoplastic material for a particular application or to ensure reproducible processing, additional requirements may be given in data block 5 (see clause 3, introductory paragraph).