標準號：ANSI/ASTM D4591-2001
中文標準名稱：用差分掃描比色儀測定熒光聚合物過渡期溫度和熱量的方法
英文標準名稱：Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
標準類型：G31
發布日期：1999/12/31 12:00:00
實施日期：2001/6/10 12:00:00
中國標準分類號：G31
國際標準分類號：83.080.20
適用范圍：This test method defines conditions for the use of differential scanning calorimetry (DSC) with fluoropolymers. It covers the use of DSC analyses with the fluoropolymers, PTFE, PVDF, PCTFE, and PVF and their copolymers PFA, MFA, FEP, ECTFE, EFEP, VDF/HFP, VDF/TFE/HFP, VDF/CTFE. The test method is applicable to the analysis of powders as well as samples taken from semi-finished or finished products. The nature of fluoropolymers is such that special procedures are needed for running DSC analysis and interpreting the results. The values stated in SI units as detailed in IEEE/ASTM SI-10 are to be regarded as the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. There is currently no ISO standard that duplicates this test method. ISO 12086-1 and ISO 12086-2 cover similar testing and reference this test method for testing conditions.