標準號：BS EN 61000-4-16-1998+A2-2011
中文標準名稱：電磁兼容性(EMC).試驗和測量技術.頻率范圍0 Hz至150 kHz的傳導共模干擾抗擾性試驗
英文標準名稱：Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
標準類型：L06
發布日期：1998/5/15 12:00:00
實施日期：1998/5/15 12:00:00
中國標準分類號：L06
國際標準分類號：33.100.20
引用標準：IEC 60050(161);IEC 60068-1
適用范圍：This part of IEC 61000 relates to the immunity requirements and test methods for electrical andelectronic equipment to conducted, common mode disturbances in the range d.c. to 150 kHz.The object of this standard is to establish a common and reproducible basis for testingelectrical and electronic equipment with the application of common mode disturbances topower supply, control, signal and communication ports.This standard defines– test voltage and current waveform;– range of test levels;– test equipment;– test set-up;– test procedures.For some types of ports, for example ports intended to be used with highly balanced lines,additional test provisions may be established by product committee specifications.The test is intended to demonstrate the immunity of electrical and electronic equipment whensubjected to conducted, common mode disturbances such as those originating from power linecurrents and return leakage currents in the earthing/grounding system.The disturbances produced by 400 Hz mains systems are not included in the scope of thisstandard.Actual interference due to these disturbance phenomena is relatively rare, except in industrialplants. Product Committees should therefore consider whether there is a justification forapplying this standard in their Product/Product Family standards (see also clause 3).This test is not relevant for equipment ports intended to be connected to short cables, having alength less than 20 m or less.The immunity to harmonics and interharmonics, including mains signalling, on a.c. powerports (in differential mode) is not included in the scope of this standard and is covered byIEC 61000-4-13.The immunity to conducted disturbances generated by intentional radio-frequency transmittersis not included in the scope of this standard and is covered by IEC 61000-4-6.