標準號：BS EN 60146-1-3-1993
中文標準名稱：半導體變換器.第1部分:一般要求和線路換向變流器.第3節(jié):變壓器和電抗器
英文標準名稱：Semiconductor convertors. General requirements and line commutated convertors. Transformers and reactors
標準類型：L43
發(fā)布日期：1993/5/15 12:00:00
實施日期：1993/5/15 12:00:00
中國標準分類號：L43
國際標準分類號：29.180
適用范圍：This Part 1-3 of the International Standard relates, in general, to those characteristics wherein converter transformers differ from ordinary power transformers. In all other respects, the rules specified in IEC 76 shall apply to convenor transformers also, as far as they are not in contradiction with this standard. It should be borne in mind that a rectifier transformer operates with non-sinusoidal current waveshape. In single-way connection, the current in each cell winding contains a d.c. component which calls for special attention in design and testing. In some cases, a special design is necessary when external short-circuits and cell failures would cause abnormal stress. For certain types of transformers, the waveshape of the normal operating voltage is non-sinusoidal. The core loss of such equipment is to be determined by applying a sinu-soidal voltage having the same half-cycle arithmetic mean value and the same fundamental frequency as the voltage applied in service.