標準號:ONORM ENV 41204-1991
中文標準名稱:信息系統互連.文件傳輸,訪問和管理.簡單文件傳輸
英文標準名稱:Information systems Interconnection - File transfer, access and management - Simple file transfer
發布日期:1991/6/1 12:00:00
實施日期:1999/12/31 12:00:00
適用范圍:This Functional Standard covers transfer of files between the filestores of two end systems, using the OSI connection-mode Transport Service to provide the interconnection. One end system acts in the Initiator role and initiates the file transfer, the other end system acts in the Responder role and provides access to the file in the Virtual Filestore.These role combinations and interoperability are shown in the table below.Transfer o? files is supported for files with an unstructured constraint set and containing binary or character data.This Functional Standard specifies implementations that support file transfer, i.e. the ability to:1. read a complete file;2. write (replace, extend) to a file;3. optionally: create and delete a file;4. optionally: read the attributes of a file.This Functional Standard specifics how the OSI Session Layer, Presentation Layer and Application Layer standards shall be used to provide the functions defined above. It does not specify total system capability. In particular, a system may operate this profile and at the same time engage in other communications. The requirements placed on a system in this Functional Standard are solely those necessary for operation of the protocol set specified.The basis of this Functional Standard is the base documents as listed in clause 3. Note that all references are made to a specific version of each base document, and to that version only. (Any subsequent versions may contain changes that make parts of this Functional Standard invalid.)
相關標準
《ETSIEN301511V12.5.1》全球移動通信系統(GSM);移動臺(MS)設備;協調標準覆蓋2014/53/EU指令條款3.2章的基本要求
《YD/T3168-2016》公眾無線局域網設備射頻指標技術要求和測試方法
《ETSIEN300328V2.1.1(2016-11)5.4.10》電磁兼容和射頻頻譜特性規范;寬帶傳輸系統;工作在2.4GHz 工科醫頻段,使用寬帶調制技術的數據通信設備;協調標準,根據R&TTE指令章節3.2包含的必需要求
《IEEE802.11ac-2013》信息技術 系統間通訊和信息交換 局域網和城域網 專門要求 第11部分:無線局域網媒介訪問控制(MAC)和物理層(PHY)規范 修改件4:6 GHz以下頻帶中運行高通量的增強功能
《ETSIEN300220-1V2.4.1(2012-05)8.6》電磁兼容性和射頻頻譜問題(ERM);短距離設備(SRD);使用在頻率范圍25MHz-1000MHz,功率在500mW 以下的射頻設備;第1部分:技術參數和測試方法
《YD/T3168-2016》公眾無線局域網設備射頻指標技術要求和測試方法
《IEEE802.11ac-2013》信息技術 系統間通訊和信息交換 局域網和城域網 專門要求 第11部分:無線局域網媒介訪問控制(MAC)和物理層(PHY)規范 修改件4:6 GHz以下頻帶中運行高通量的增強功能
《IEEE802.11g-2003》信息技術 系統間的遠程通訊和信息交換 局域網和城域網 特殊要求 第11部分:無線局域網媒體訪問控制子層協議和物理層規范:2.4GHz頻段的擴展傳輸速率
《YD/T1576.1-2013》800MHz/2GHz cdma2000數字蜂窩移動通信網設備測試方法:移動臺第1部分基本無線指標、功能和性能
《ETSIEN300328V2.2.2(2019-07)5.4.4》寬帶傳輸系統;在2,4 GHz頻段工作的數據傳輸設備;無線電頻譜統一標準
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;