標準號:BS 7164-23.1-1993
中文標準名稱:生橡膠和硫化橡膠的化學試驗.第23部分:含硫總量的測定方法.第1節:氧氣燃燒瓶法
英文標準名稱:Chemical tests for raw and vulcanized rubber - Methods for determination of total sulfur content - Oxygen combustion flask method
標準類型:G34
發布日期:1993/1/15 12:00:00
實施日期:1993/1/15 12:00:00
中國標準分類號:G34
國際標準分類號:83.060
適用范圍:This part of ISO 6528 specifies an oxygen com-bustion flask method for the determination of the total sulfur content of rubber.
The method is applicable for the determination of all the sulfur present in a rubber or rubber product, except that contained in barium sulfate.
It is applicable to NR, CR, SBR, BR, IR, IIR, EPDM, NBR and ebonite. (The meanings of these desig-nations are given in ISO 1629:1987, Rubber and latices —Nomenclature.)
This method gives unreliable (usually low) results in the presence of lead, antimony, zinc, barium and calcium compounds. If calcium carbonate is the only calcium compound present, good results can be ob-tained by modifying the absorbing solution.
相關標準
《Q/BNM-TTS-0401—20196.2》電子電器零部件/系統電磁兼容測試規范 (低壓部件)
《Q/LPYSY0029-20208.3》車輛電器電子零部件EMC要求
《Q/WMJ023068A-201910》乘用車高壓電氣、電子零部件補充電磁兼容規范
《ISO11452-4:2020》道路車輛 電氣部件對窄帶輻射電磁能的抗擾性試驗方法 第4部分:線束激勵法
《Q/LPYSY0029-20208.15》車輛電器電子零部件EMC要求
《Q/BNM-TTS-0401—20195.1》電子電器零部件/系統電磁兼容測試規范 (低壓部件)
《Q/LQBC-208—201913》乘用車零部件電磁兼容性規范
《Q/LPYSY0029-20208.18》車輛電器電子零部件EMC要求
《Q/WMJ023068A-201913》乘用車高壓電氣、電子零部件補充電磁兼容規范
《Q/LPYSY0029-20208.8》車輛電器電子零部件EMC要求
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;