標準號:IS 9108-1979
發布日期:1980/1/1 12:00:00
實施日期:1999/12/31 12:00:00
適用范圍: This standard specifies methods for measurement of water flow in open channels using rectangular and triangular-notch (V-notch) thin-plate weirs. The flow conditions considered are limited to steady, free and fully ventilated discharge of clear water. Recommended discharge coefficients are applicable to water only in the approximate range of tem-peratures from 5 to 40°C. Using the coefficients for water temperatures several degrees outside this range will result in negligible error except at very small heads. Limitations of applicability related to weir and flow geometry are specified for the recommended formulae.
相關標準
《AWS D1.1/D1.1M-2020》美國鋼結構焊接規范 AWS D1.1/D1.1M-2020 第8章
《NYT 1978-2010》肥料 汞、砷、鎘、鉛、鉻含量的測定 NYT 1978-2010 附錄A, B
《BS EN 10160:1999》厚度大于或等于6毫米的鋼板制品的超聲波檢測 BS EN 10160:1999
《EN ISO 945-1:2019》鑄鐵顯微結構 第1部分:目視石墨分級 EN ISO 945-1:2019
《AWS D1.1/D1.1M-2020》鋼結構焊接規范 AWS D1.1/D1.1M-2020 第八章
《AWS D1.1/D1.1M-2020》鋼結構焊接規范 AWS D1.1/D1.1M-2020 第八章
《ASTM E1251-2017a》用火花源原子發射光譜法分析鋁和鋁合金的方法 ASTM E1251-2017a
《ISO 2813:2014 (E)》色漆和清漆 漆膜之20°、60°和85°鏡面光澤的測定 ISO 2813:2014 (E)
《AWS D1.1/D1.1M-2020》鋼結構焊接規范 AWS D1.1/D1.1M-2020
《EN ISO 15614-1-2017+A1-2019/7.4.3》金屬材料焊接工藝評定試驗 第1部分:鋼的弧焊和氣焊、鎳及鎳合金的弧焊 EN ISO 15614-1-2017+A1-2019/7.4.3
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;