標準號：DIN EN 12697-22-2007
中文標準名稱：瀝青混合物.熱混合瀝青用試驗方法.第22部分:輪跡
英文標準名稱：Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking; German version EN 12697-22:2003+A1:2007
標準類型：E43
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：E43
國際標準分類號：93.080.20
引用標準：EN 12697-35-2004;ISO 48;ISO 7619;EN 12697-6-2003;EN 12697-6/A1;EN 12697-7;EN 12697-27;EN 12697-32-2003;EN 12697-32/A1;EN 12697-33/A1;EN 12697-35/A1;EN 12697-33-2003
適用范圍：This European Standard describes test methods for determining the susceptibility of bituminous materials todeform under load. The test is applicable to mixtures with upper sieve size less than or equal to 32 mm.The tests are applicable to specimens that have either been manufactured in a laboratory or cut from apavement; test specimens are held in a mould with their surface flush with the upper edge of the mould.The susceptibility of bituminous materials to deform is assessed by the rut formed by repeated passes of aloaded wheel at constant temperature. Three alternative types of device can be used according to thisstandard: large-size devices, extra large-size devices and small-size devices. With large-size devices andextra large-size devices, the specimens are conditioned in air during testing. With small-size devices,specimens are conditioned, in either air or water.NOTE Large-size and extra large-size devices are not suitable for use with cylindrical cores.