標準號：DIN EN 843-1-2008
中文標準名稱：**工業陶瓷.室溫下單片陶瓷的機械性能.第1部分:撓曲強度的測定
英文標準名稱：Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength; English version of DIN EN 843-1:2008-08
標準類型：Q32
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：Q32
國際標準分類號：81.060.30
引用標準：EN ISO 7500-1;EN ISO/IEC 17025;ISO 3611;ISO 4677-1;ISO 4677-2;EN 623-4;EN 843-5
適用范圍：This part of EN 843 specifies methods for determining the nominal flexural strength of advanced monolithictechnical ceramic materials at ambient temperature. The available loading geometries are three- and four-pointflexure, using rectangular section test pieces of two prescribed geometries: 20 mm support span (A) and 40 mmsupport span (B).NOTE This part of EN 843 differs from ISO 14704 (see Bibliography) in respect of span A (not included in the ISOversion), the absence of the 30 mm span option, and the required use of a fully articulating test jig.The test applies to materials with grain size less than 200 pm.The test prescribes four categories of surface finish applied to the test pieces: Ⅰ: as-fired or annealed after machining; Ⅱ: standard finishing by grinding; Ⅲ: standard finishing by lapping/polishing; Ⅳ: machined using agreed grinding procedures and material removal rates.