標準號：BS EN 777-4-2009
中文標準名稱：非家用的多個氣體燃燒器架空輻射管式加熱器系統.第4部分:系統H.安全
英文標準名稱：Multi-burner gas-fired overhead radiant tube heater systems for nondomestic use Part 4: System H — Safety
標準類型：Q83
發布日期：2009/4/30 12:00:00
實施日期：2009/4/30 12:00:00
中國標準分類號：Q83
國際標準分類號：91.140.40
引用標準：EN 88-1-2007;EN 126-2004;EN 257;EN 298-2003;EN 437-2003;EN 10226-1-2004;EN 10226-2-2005;EN 60335-1-2002;EN 60335-2-102-2006;EN 60529-1992;EN 60584-1-1995;EN 60584-2-1993;EN ISO 228-1-2003;EN ISO 3166-1-2006;EN ISO 6976-2005;ISO 7005-1-1992;ISO 7005-2-1988
適用范圍：This European Standard specifies the requirements and test methods for the construction, safety,classification and marking of non-domestic gas-fired overhead radiant tube systems incorporating two ormore burner units with each burner under the control of an automatic burner control system, andoperated by a single fan providing a single flue outlet, called system H and referred to in the body of thetext as the “system”.This standard is applicable to Type B52 systems (see 4.3) intended for use in other than domesticdwellings, in which the supply of combustion air and the evacuation of the products of combustion isachieved by mechanical means. This standard is applicable only to such systems that have fully premixedgas/air burners.This standard is not applicable to:a) systems designed for use in domestic dwellings;b) outdoor systems;c) systems of heat input in excess of 120 kW (based on the net calorific value of the appropriatereference test gas);d) systems having a draught diverter;e) systems that are designed for continuous condensation within the flue system under normaloperating conditions;f) systems having combustion products evacuation ducts that are non-metallic.This standard is applicable to systems which are intended to be type tested. It also includes requirementsconcerning the evaluation of conformity, including factory production control, but these requirements onlyapply to POCEDs and their associated terminals.NOTE Requirements for systems which are not intended to be type tested would need to be subject tofurther consideration.Requirements concerning the rational use of energy have not been included in this European Standard.