標準號:ANSI/ASTM D5000-2005
中文標準名稱:利用測流傳感器對粘土元素進行活性評估的實施規程
英文標準名稱:Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor
標準類型:P13
發布日期:2005/11/29 12:00:00
實施日期:2005/11/29 12:00:00
中國標準分類號:P13
國際標準分類號:91.100.15
適用范圍: This practice describes a field procedure to determine whether the useful life of the clay has been exceeded in canister or bag-type clay elements that are installed in ground filtration units of aviation fuel handling systems. The field procedure utilizes the apparatus of Test Methods D3948 to periodically test a small clay capsule installed in a sidestream around a clay treatment vessel that receives a fixed ratio of the same fuel that flows through the clay elements in the vessel. The values stated in SI units are to be regarded as standard. The inch-pound units in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
相關標準
《ASTM E18-20》金屬材料洛氏硬度試驗方法 ASTM E18-20
《GB/T 3177-2009》產品幾何技術規范(GPS) 光滑工件的尺寸檢測 GB/T 3177-2009
《GB/T 1958-2017》產品幾何技術規范 (GPS)幾何公差 檢測與驗證 GB/T 1958-2017
《GB/T 4698.7-2011》海綿鈦、鈦及鈦合金化學分析方法 氧量、氮量的測定 GB/T 4698.7-2011
《GB/T 1958-2017》產品幾何技術規范(GPS)形狀與位置公差檢測規定 GB/T 1958-2017
《GB/T 1958-2017》產品幾何技術規范(GPS)形狀與位置公差檢測規定 GB/T 1958-2017
《GB/T 4698.7-2011》海綿鈦、鈦及鈦合金化學分析方法 氧量、氮量的測定 GB/T 4698.7-2011
《ASTM E10-18》金屬材料布氏硬度標準試驗方法 ASTM E10-18
《ASTM E18-20》金屬材料洛氏硬度標準試驗方法 ASTM E18-20
《ASTM E18-20》金屬材料洛氏硬度的標準試驗方法 ASTM E18-20
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;