標準號：ISO 3070-2-2007
中文標準名稱：機床.測試臥式鏜床和銑床精度的試驗條件.第2部分:帶可移動床身和固定式工作臺的鏜床和銑床
英文標準名稱：Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 2: Machines with movable column and fixed table
標準類型：J54
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J54
適用范圍：This part of ISO 3070 specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-7 geometric tests,machining tests, spindle tests and tests for checking the accuracy and repeatability of positioning by numericalcontrol of general purpose, normal accuracy, horizontal spindle boring and milling machines having a movablecolumn and fixed table. This part of ISO 3070 also specifies the applicable tolerances corresponding to thesetests.This type of machine can be provided with spindle heads of different types, such as those with sliding boringspindle and milling spindle, sliding boring spindle and facing head, or ram or milling ram.This part of ISO 3070 concerns machines having movement of the column or column saddle on the bed(X axis), vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (Z axis) and,possibly, a feed movement of radial facing slide in the facing head (U axis). Some machines also have anintermediate saddle with slideways between column and bed to achieve additional movement of the columnparallel to the spindle axis (W axis).NOTE In ISO 3070-1, spindle ram movement is designated as the W axis.This part of ISO 3070 deals only with the verification of the accuracy of the machine. It does not apply to theoperational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor tomachine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing theaccuracy.