標準號：DIN EN ISO 29988-2-2018
中文標準名稱：塑料. 聚甲醛模塑和擠塑材料. 第2部分: 試樣制備和性能測定 (ISO 29988-2-2018); 德文版本 EN ISO 29988-2-2018
英文標準名稱：Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 29988-2:2018); German version EN ISO 29988-2:2018
標準類型：G31
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G31
國際標準分類號：83.080.20
引用標準：DIN EN 60112-2010;DIN EN 60243-1-2014;DIN EN 60296-2012;DIN EN 62631-3-1-2017;DIN EN 62631-3-2-2016;DIN EN ISO 62-2008;DIN EN ISO 75-2-2013;DIN EN ISO 178-2013;DIN EN ISO 179-1-2010;DIN EN ISO 179-2-2012;DIN EN ISO 180-2013;DIN EN ISO 294-1-2017;DIN EN IS
適用范圍：This part of ISO 29988 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyoxymethylene moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given. Procedures and conditions are described for the preparation of test specimens, and procedures are given for measuring properties of the materials from which these specimens are made. Properties and test methods which are suitable and necessary to characterize polyoxymethylene moulding and extrusion materials are listed. The properties have been selected from the general test methods in ISO 10350-1:1998. Other test methods in wide use for, or of particular significance to, these moulding and extrusion materials are also included in this part of ISO 29988 as designatory properties specified in ISO 29988-1: melt flow rate and tensile modulus. In order to obtain reproducible and comparable test results, it is necessary to use the methods of specimen preparation and conditioning. The specimen dimensions and the test procedures are specified herein. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.