標準號：DIN EN 13957-2009
中文標準名稱：鋁和鋁合金.通用擠制圓盤管.規范
英文標準名稱：Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification; German version EN 13957:2008
標準類型：H61
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：H61
國際標準分類號：77.150.10
引用標準：EN 515;EN 573-3;EN 755-2;EN 12258-1-1998
適用范圍：This European Standard specifies the tolerances on dimensions and form of round aluminium and aluminiumalloys porthole extruded tubes with an outside diameter (OD) of over 2 mm up to and including 50 mmsupplied in coil form or in straight lengths cut from coiled material: see Figure 1.This European Standard mainly applies to round extruded tube for general engineering applicationsmanufactured in lxxx series of aluminium and 3xxx series of alloys. The use of this European Standard fornon-standardised lxxx aluminium and 3xxx alloys or alloys from other series, e.g. 5xxx or 6xxx, is subject toagreement between supplier and purchaser.This European Standard only applies to:-- round tube produced by the porthole/bridge method, extruded in coil form to the final dimensions required;-- tube as above but delivered in straight lengths cut from coiled material.This European Standard does not apply to:-- seamless extruded (die/mandrel method) tubes (EN 755-7);-- tubes extruded in straight lengths (i.e. not coiled) (EN 755-8).