標準號:ANSI/ASTM D1094-2007
中文標準名稱:航空燃料水反應的試驗方法
英文標準名稱:Test Method for Water Reaction of Aviation Fuels
標準類型:E31
發布日期:2007/12/25 12:00:00
實施日期:1999/12/31 12:00:00
中國標準分類號:E31
國際標準分類號:75.160.20
適用范圍: This test method covers the determination of the presence of water-miscible components in aviation gasoline and turbine fuels, and the effect of these components on volume change and on the fuel-water interface. The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. This standard involves the use of hazardous chemicals identified in Section 7. Before using this standard, refer to suppliers' safety labels, Material Safety Data Sheets and other technical literature.
相關標準
《GB/T7251.1-2013》低壓成套開關設備和控制設備 第1部分:總則 GB/T7251.1-2013
《GB/T 5654-2007》液體絕緣材料 相對電容率、介質損耗因數和直流電阻率的測量 GB/T 5654-2007 12
《GB/T 507-2002》絕緣油 擊穿電壓測定法 GB/T 507-2002 8
《GB/T10228-2015》干式電力變壓器技術參數和要求 GB/T10228-2015
《JB/T7834-1995》弧焊變壓器 JB/T7834-1995
《JB/T7835-1995》弧焊整流器 JB/T7835-1995
《GB/T15579.1-2013》弧焊設備第1部分:焊接電源 GB/T15579.1-2013
《GB/T7251.12-2013》低壓成套開關設備和控制設備第2部分:成套電力開關和控制設備 GB/T7251.12-2013
《GB4706.10-2008》家用和類似用途電器的安全 按摩器具的特殊要求 GB4706.10-2008
《GB 19510.1-2009》燈的控制裝置 第1部分 一般要求和安全要求 GB 19510.1-2009 9
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;