標準號：DIN EN 14753-2008
中文標準名稱：機械安全.連續鑄鋼機械和設備的安全要求
英文標準名稱：Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel; English version of DIN EN 14753:2008-03
標準類型：H90
發布日期：1999/12/31 12:00:00
實施日期：2008/3/1 12:00:00
中國標準分類號：H90
國際標準分類號：77.180
引用標準：EN 294;EN 349;EN 574;EN 614-1;EN 614-2;EN 626-1-1994;EN 626-2-1996;EN 811;EN 842;EN 953-1997;EN 981;EN 982;EN 983;EN 1037-1995;EN 1050;EN 1088;EN 1837;EN 12094-1;EN 13478;prEN 15004-1;EN 50171;EN 60204-1-2006;EN 61310-1;EN 61310-2;EN ISO 4871-1996;EN ISO
適用范圍：This European Standard applies for plant (containing machinery and equipment) used in the process ofcontinuous casting of liquid steel (hereafter referred to as continuous casting machine, CCM) as defined in 3.1and illustrated in Annex B.This European Standard deals with all significant hazards, hazardous situations and events relevant tomachinery and equipment for the continuous casting of steel, when they are used as intended and underconditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This European Standard specifies the safety requirements to be met during design, assembly, transport,commissioning, operation, maintenance (as described in Clause 5) and decommissioning of the equipment.This European Standard assumes that the machinery and equipment of the plant is operated and maintainedby adequately trained and competent personnel (see 7.4). Manual intervention for setting, adjustment andmaintenance is accepted as part of the intended use of the plant.This European Standard assumes that the machinery is used with adequate workplace lighting conforming toEN 12464-1.NOTE Local regulations regarding lighting should be considered and could differ from requirements of EN 12464-1.This European Standard applies to:CCM for the transformation of molten liquid steel into solid products in sections (e.g. square, rectangular,beam blank, circular)-- from the point where overhead cranes or other transport systems deposit ladles (e.g. in a ladle turret or ladle car);-- via casting process;-- via cutting equipment;-- to the run-out-area where the cut product is collected. This European Standard does not cover safety requirements for: -- auxiliary plants (e.g. water treatment, refractory handling); -- ladles; -- cranes; -- winches and hoists; -- conveyors or handling systems. This European Standard is not applicable to CCM, manufactured before the date of publication of this standard by CEN.