標準號：ISO 22514-3-2008
中文標準名稱：過程管理的統計方法.能力和性能.第3部分:離散部件測量數據的機械性能研究
英文標準名稱：Statistical methods in process management - Capability and performance - Part 3: Machine performance studies for measured data on discrete parts
標準類型：A10
發布日期：2008/2/15 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：A10
國際標準分類號：03.120.30
適用范圍：This part of ISO 22514 prescribes the steps to be taken in conducting short-term performance studies that aretypically performed on machines where parts produced consecutively under repeatability conditions areconsidered. The number of observations to be analysed will vary according to the patterns the data produce,or if the runs (the rate at which items are produced) on the machine are low in quantity. The methods are notrecommended where the sample size produced is less than 30 observations. Methods to be used for handlingthe data and carrying out the calculations are described. In addition, machine performance indices and theactions required at the conclusion of a machine performance study are described.The document is not applicable when tool wear patterns are expected to be present during the duration of thestudy, nor if autocorrelation between observations is present. The situation where a machine has captured thedata, sometimes thousands of data points collected in a minute, is not considered suitable for the applicationof this part of ISO 22514.