標準號：ISO 27048-2011
中文標準名稱：輻射防護.受內部射線照射的員工檢測用計量評定
英文標準名稱：Radiation protection. Dose assessment for the monitoring of workers for internal radiation exposure
標準類型：F74
發布日期：2011/1/15 12:00:00
實施日期：2011/1/15 12:00:00
中國標準分類號：F74
國際標準分類號：13.280
引用標準：ISO/IEC Guide 98-3;ISO/IEC Guide 99;ISO 5725-1;ISO 5725-2;ISO 5725-3;ISO 20553-2006;ISO 28218
適用范圍：This International Standard specifies the minimum requirements for the evaluation of data from the monitoringof workers occupationally exposed to the risk of internal contamination by radioactive substances. It presentsprocedures and assumptions for the standardised interpretation of monitoring data, in order to achieveacceptable levels of reliability. Those procedures allow the quantification of exposures for the documentationof compliance with regulations and radiation protection programmes. Limits are set for the applicability of theprocedures in respect of the dose levels above which more sophisticated methods will have to be applied.This International Standard addresses the following:a) procedures for dose assessment based on reference levels for routine and special monitoringprogrammes;b) assumptions for the selection of dose-critical parameter values;c) criteria for determining the significance of monitoring results;d) interpretation of workplace monitoring results;e) uncertainties arising from sampling, measurement techniques and working conditions;f) the special topics of1) interpretation of multiple data arising from different measurement methods at different times,2) handling data below the decision threshold,3) rogue data, and4) calculation of doses to the embryo/foetus and infant;g) reporting/documentation;h) quality assurance.It is not applicable to the following:- dosimetry for litigation cases;- modelling for the improvement of internal dosimetry;- the potential influence of decorporation measures (e.g. administration of chelating agents);- the investigation of the causes or implications of an exposure;- dosimetry for contaminated wounds.