標準號：ISO 1209-1-2007
中文標準名稱：硬質泡沫塑料.彎曲特性測定.第1部分:基本彎曲試驗
英文標準名稱：Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test
標準類型：G32
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G32
國際標準分類號：83.100
適用范圍：This part of ISO 1209 specifies a simple method for assessing the behaviour of a bar of rigid cellular plasticunder the action of three-point bending.It may be used to determine— either the load for a specified deformation;— or the load at break.The version of the method specified in this part of ISO 1209 uses small test specimens and does not producepure bending. Hence it does not permit the calculation of the flexural strength or the apparent flexural modulus(modulus of elasticity). The user is referred to ISO 1209-2 for the determination of these parameters.The method is not applicable to cellular plastics in which significant crushing is observed. Numerical valuesshould be compared only when determined on materials of similar physical properties and dimensions.The method is limited to materials of 20mm thickness or greater.