標準號：BS EN ISO 18278-1-2004
中文標準名稱：電阻焊.可焊性.金屬材料的電阻點焊、縫焊和凸焊的可焊性評定
英文標準名稱：Resistance welding - Weldability - Assessment of weldability for resistance spot, seam and projection welding of metallic materials
標準類型：J33
發布日期：2004/11/25 12:00:00
實施日期：2004/11/25 12:00:00
中國標準分類號：J33
國際標準分類號：25.160.10
適用范圍：SO 18278-1:2004 recommends procedures for determining the generic weldability for resistance spot, seam and projection welding of metallic materials.This procedure is applicable for the assessment of the weldability of uncoated/coated steels, stainless steels and non-ferrous alloys such as aluminium, titanium, magnesium and nickel and their alloys of single thickness lower than or equal to 5 mm.The weldability of metallic materials in resistance welding is defined in terms of:the ability to make the weld in the first place;the ability to continue making welds;the ability of the weld to withstand the imposed service stresses.The procedures recommended in ISO 18278-1:2004 can be used to:compare the weldability of different metallic materials;compare the welding response of particular welding equipment and allow comparisons between different equipment and determine the influence of the static/dynamic properties of different welding equipment;determine the weldability of a material when any welding configuration is changed e.g. electrode material and/or shape, water cooling requirements etc.;investigate the effect of welding parameters such as welding current, weld time, electrode force or complex welding schedules including pulse welding, current stepping etc. on weldability.