標準號:BS 5516-1-2004
中文標準名稱:建筑物用特制和傾斜門窗玻璃.傾斜和垂直的特制門窗玻璃的設計與安裝實用規程
英文標準名稱:Patent glazing and sloping glazing for buildings - Code of practice for design and installation of sloping and vertical patent glazing
標準類型:P32
發布日期:2004/11/26 12:00:00
實施日期:2004/11/26 12:00:00
中國標準分類號:P32
國際標準分類號:81.040.20;91.060.50
適用范圍:This British Standard gives recommendations for the design, manufacture, installation and maintenance of sloping and vertical patent glazing systems attached to and supported by structural members of adequate strength, stiffness and stability. All recommendations apply to flat, including faceted, patent glazing and infilling. They may also apply to curved patent glazing and infilling except for the structural design where specialist advice is needed.
The patent glazing systems included in this standard comprise glazing bars of aluminium or steel, which can be clad totally or partially clad with lead or PVC-U. for two-edge support and four-edge support systems for single and double glazing or other infill. A range of transparent and opaque infillings of glass, plastics glazing sheet materials and other infill materials are included: specific information on plastics glazing sheet materials is given in BS 5516-2:2004, Annex A.
This standard covers the use of patent glazing in permanent buildings and structures, including conservatories but excludes greenhouses. Clauses that are relevant also apply to the use of patent glazing inside buildings.
This standard does not include recommendations for the design of the supporting structure to which the patent glazing is attached.
Requirements for standards of workmanship for glazing have been published separately as BS 8000-7 and, therefore, this subject is not within the scope of this standard.
Since the correct selection of materials to be used in glazing for buildings depends on many factors, attention is drawn to the recommendations in the other parts of this standard.
相關標準
《GB/T 2423.37-2006IEC 60068-2-68:1994》電工電子產品基本環境試驗 第2部分:試驗方法 試驗L:沙塵試驗 GB/T 2423.37-2006IEC 60068-2-68:1994
《GB/T 2423.35-2005》電工電子產品基本環境試驗 第2部分:試驗方法 試驗Z/AFc:散熱和非散熱試驗樣品的低溫/振動(正弦)綜合試驗 GB/T 2423.35-2005
《GB/T 531.1-2008》硫化橡膠或熱塑性橡膠 壓入硬度試驗方法 第1部分:邵氏硬度計法(邵爾硬度) GB/T 531.1-2008
《ISO 105-B02:2014》紡織品 色牢度試驗 第B02部分:耐人造光色牢度 氙弧褪色燈試驗 ISO 105-B02:2014
《ABNT NBR 6752:2020》乘用車,輕型商用車和SUV的鋁合金車輪-要求和測試 ABNT NBR 6752:2020
《30 StVZO(TUEV)》德國TUV標準STVZO:1998汽車及其拖車指定車輪的試驗指導 30 StVZO(TUEV) 2
《ABNT NBR 6752:2020》乘用車,輕型商用車和SUV的鋁合金車輪-要求和測試 ABNT NBR 6752:2020
《GMW14910-2019》車輪側向沖擊試驗 GMW14910-2019
《ISO 7141:2005(E)》道路車輛-輕合金車輪--沖擊試驗 ISO 7141:2005(E)
《SAE J175:2016》車輪--沖擊試驗方法--道路車輛 SAE J175:2016 2
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;