標準號：IEC 61800-4-2002
中文標準名稱：調速電氣傳動系統.第4部分:一般要求.交流電壓1000 V以上但不超過35 kV的交流調速電氣傳動系統額定值的規范
英文標準名稱：Adjustable speed electrical power drive systems - Part 4: General requirements; Rating specifications for a.c. power drive systems above 1000 V a.c., and not exceeding 35 kV
標準類型：K20
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：K20
國際標準分類號：29.160.30
引用標準：GB 755;GB 1094.2-1996;GB/T 1993-1993;GB/T 2900.18-1992;GB/T 2900.56-2002
適用范圍：This part of IEC 61800 applies to adjustable speed a.c. drive systems that include power conversion, control equipment and a motor. Excluded are traction for railway applications and electrical vehicle drives.It applies to power drive systems (see figure 1) with converter voltages (line-to-line voltage), between 1 kV a.c. and 35 kV a.c, input side 50 Hz or 60 Hz, and load side frequencies up to 600 Hz. Requirements for voltages above 15 kV are not included and are defined by agreement between the manufacturer and the system supplier.For power drive systems, with voltages above 1 kV, using a step-down input transformer and/or a step-up output transformer in connection with a low voltage converter (below 1 000 V), IEC 61800-2 applies.EMC aspects are covered in IEC 61800-3.Specific safety requirements for drive systems with voltage above 1 kV will be covered in IEC 61800-5.This standard gives the characteristics of the converters, their topologies and their relationship with the complete a.c. drive system. It also states their performance requirements with respect to ratings, normal operating conditions, overload conditions, surge withstand capabilities, stability, protection, a.c. line earthing, topologies and testing. Furthermore, it deals with application guidelines, such as control strategies, torsion analysis, recommendations for earthing and drive system component integration.