標準號：ISO 13919-2-2001
中文標準名稱：焊接 電子束和激光束焊接接頭 缺陷質量等級指南 第2部分：鋁及其可焊合金
英文標準名稱：Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys
標準類型：J33
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J33
國際標準分類號：25.160.40
適用范圍：This standard provides guidance on levels of imperfections in electron and laser beam welded joints in aluminium and its alloys. Three levels are given in such a way as to permit application for a wide range of welded fabrications. The levels refer to production quality and not to the fitness-for-purpose of the product manufactured. This standard applies to electron and laser beam welding of: - aluminium and its alloys; - all types of welds welded with or without additional filler wire; - materials equal to or above 1 mm thickness for electron and laser beam welding. When significant deviations from the joint geometries and dimensions stated in this standard are present in the welded product, it is necessary to evaluate to what extent the provisions of this standard can apply. NOTE For circular welds, a lower quality level e.g., may be specified for the fade-out zone. Metallurgical aspects, e.g. grain size, hardness are not covered by this standard.