標準號：BS ISO 1984-2-2001
中文標準名稱：固定高度工作臺的手工控制銑床的試驗條件.精度試驗.帶有垂直主軸的機器
英文標準名稱：Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with vertical spindle
標準類型：J54
發布日期：2001/8/15 12:00:00
實施日期：2001/8/15 12:00:00
中國標準分類號：J54
國際標準分類號：25.080.20
適用范圍：This part of ISO 1984 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose and normal-accuracy milling machines with table of fixed height and with a vertical spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 1984 deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to checking of its characteristics (speeds, feeds, etc.), which should generally be checked before testing the accuracy. This part of ISO 1984 defines the terminology used for the principal elements of the machine and indicates the designation of axes in accordance with ISO 841[1]. NOTE Numerically controlled milling machines are covered by ISO 10791-2[2].