標準號：SIS SS-ISO 7626-2-1990
中文標準名稱：振動與沖擊．機械柔性性試驗測定．第2部分：使用振動式激勵器作單點直線激勵測量
英文標準名稱：Vibration andshock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter
發布日期：1990/10/17 12:00:00
實施日期：1999/12/31 12:00:00
適用范圍：This part of ISO 7626 specifies procedures for measuring mechanical mobility and other frequency-response functions of structures, such as buildings, machines and vehicles, using a single translational vibration exciter attached to the structure under test for the duration of the measurement.It is applicable to measurements of mobility, accelerance, or dynamic compliance, either as a driving-point measurement or as a transfer measurement. It also applies to the determination of the arithmetic reciprocals of those ratios such as free effec-ttve m?ss. Although excitation is applied at a single point, there is no limit on the number of points at which simultaneous measurements of the motion response may be made. Multiple-response measurements are required, for example, for modal analyses.