標準號：BS EN 13476-2-2007
中文標準名稱：無壓地下排水和污水塑料管系統.未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)結構壁管系統.A型、有平滑內外表面的管和配件及系統用規范
英文標準名稱：Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Specifications for pipes and fittings with smooth interna
標準類型：Q81
發布日期：2007/7/31 12:00:00
實施日期：2007/7/31 12:00:00
中國標準分類號：Q81
國際標準分類號：93.030
引用標準：EN 476;EN 580;EN 681-1;EN 681-2;EN 681-4;EN 727;EN 728;EN 744;EN 922;EN 1053;EN 1055-1996;EN 1277;EN 1401-1;EN 1411;EN 1437;EN 1446;EN 1852-1;EN 1905;EN 1979;EN 12061;EN 12256;EN 12666-1;EN 13476-1-2007;EN 13476-3;CEN/TS 14541-2007;EN 14741;EN 14758-1;EN
適用范圍：This part of EN 13476, together with EN 13476-1, specifies the definitions and requirements for pipes, fittingsand the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene(PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage andsewerage systems.This part is applicable to pipes and fittings with smooth internal and external surfaces, designated as Type A.It specifies test methods and test parameters as well as requirements.This part is applicable to:a) structured-wall pipes and fittings, which are intended to be used buried underground outside the buildingstructure; reflected in the marking of products by “U”;b) structured-wall pipes and fittings, which are intended to be used buried underground both outside(application area code “U”) and within the building structure (application area code “D”); reflected in themarking of products by “UD”.This part is applicable to structured-wall pipes and fittings with or without an integral socket with elastomericring seal joints as well as welded and fused joints.This part covers a range of pipe and fitting sizes, materials, pipe constructions, stiffness classes, applicationclasses, and tolerance classes and gives recommendations concerning colours.NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects,taking into account their particular requirements and any relevant national regulations and installation practices or codes.NOTE 2 For dimensions larger than DN 1200 OD/ID this document may be applied regarding appearance, colour,physical and mechanical characteristics as well as performance requirements.