標準號：DIN EN 13815-2006
中文標準名稱：纖維石膏模型.定義.要求和試驗方法
英文標準名稱：Fibrous gypsum plaster casts - Definitions, requirements and test methods; English version of DIN EN 13815:2006-12
標準類型：Q62
發布日期：2006/12/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：Q62
國際標準分類號：91.100.10
引用標準：EN 635-3-1995;EN 1611-1-1999;EN 10327;EN 10244-2;EN 12524;EN 13501-1;EN 13501-2;EN 20140-9;EN 13279-1;EN 13658-1;EN ISO 140-3;EN ISO 354;EN ISO 717-1;EN ISO 6946;EN ISO 10456;ISO 7892
適用范圍：This European Standard specifies the characteristics and performance requirements for fibrous gypsum plaster cast sections, rigid sheets, rigid tiles - made by various techniques in factories or workshops.This European Standard is applicable to:- conventional series producted products;- series produced products with varying properties;- individual (and non-series) produced products, insofar required to be CE marked.See 4.1 and annex D concerning the classification of the fibrous gypsum plaster casts.This European Standard covers the following performance characteristics of the fibrous gypsum plaster casts: reaction to fire, thermal resistance, as well as resistance to impact by a hard steel ball and cohedion.The following performance characteristics are linked to systems assembled with fibrous gypsum plaster casts: fire resistance, impact resistance, direct airborne sound insulation, acoustic absorption to be measures according to the corresponding European test methods. If required, tests have to be done on assembled systems simulating the end use conditions.This European Standard defines the reference test methods for the technical specifications.This European Standard also covers additional technical characteristics of fibrous gypsum plaster casts that are of importance for use and acceptance of the products by the building industry and the reference tests for these characteristics.It provides for assessment of conformity of the products to this standard.This standard does not apply to:i) fibre reinforced gypsum sheet products (see pr EN 15283);ii) gypsum elements for suspended ceilings (see EN 14246);iii) solid casts;iv) run fibre reinforced products;v) plaster based stucco casts, carton pierre decors, resin decors;vi) moulds, models and mock-ups made of fibrous gypsum plaster;vii) fibrous gypsum plaster casts that, by nature, are not intended to be fastended in position;viii) fibrous gypsum plaster casts for sets (theatre, cinema, TV);ix) fibrous gypsum plaster casts and decors intended to be installed directly on existing partitions, walls and ceilings, for purely decorative applications.