標準號：BS EN 500-1-2006+A1-2009
中文標準名稱：移動式筑路機械.安全性.一般要求
英文標準名稱：Mobile road construction machinery - Safety - Common requirements
標準類型：P97
發布日期：2006/12/31 12:00:00
實施日期：2006/11/30 12:00:00
中國標準分類號：P97
國際標準分類號：93.080.10
引用標準：CR 1030-1-1995;EN 3-7-2004;EN 286-2-1992;EN 1050-1996;EN 12643-1997;EN 13309-2000;EN 60204-1-2006;EN 60529-1991;EN 61310-1-2008;EN ISO 2860-2008;EN ISO 2867-2008;EN ISO 3411-2007;EN ISO 3457-2008;EN ISO 4871-1996;EN ISO 5353-1998;EN ISO 6682-2008;EN ISO 1
適用范圍：1.1 This part of EN 500 specifies the common safety requirements for mobile road construction machinery. The EN 500 series is applicable to mobile road construction machinery as listed in Annex A. When no specific standard exists, EN 500-1 applies.It specifies common requirements for the design and construction of mobile road construction machinery in order to protect workers from accidents and health hazards which could occur during operation, loading, transport and maintenance.Additional specific requirements for certain types of mobile road construction machinery are given in parts 2 to 4 and 6 of this standard.This part of this standard gives safety requirements for all types of mobile road construction machinery and shall be used in conjunction with one of the parts 2 to 4 and 6. These machine-specific parts do not repeat the requirements from part 1 but add to or replace the requirements for the type of mobile road construction machinery in question.Machine-specific requirements in parts 2 to 4 and 6 take precedence over the respective requirements of this standard.For types of mobile road construction machinery not dealt with in parts 2 to 4 and 6, EN 500-1 applies and if for those machinery additional derived risks may arise, these risks have to be taken into consideration.1.2 This European Standard deals with all significant hazards, hazardous situations and events relevant to mobile road construction machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4).This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards as specified in Clause 4.1.3 This European Standard applies to machines which are manufactured after the date of publication of this European Standard by CEN.